 |
880F4-FL
MAKE FLUSH CUTS FAST AND SIMPLE
When you’re in a tight spot, choose the 880F4-FL. The unique
flush-cut design of these saws allows them to cut within 3/16 inches
(4.8 mm) from walls or floors, bringing the precision of Diamond Chain Technology™ to a new level. Available in both 8 and 12 gpm models.
|
|
Download the 880F4-FL Datasheet (PDF) |
 |
| 880F4-FL PRODUCT SPECIFICATIONS - 8 GPM |
| WEIGHT |
27.3 lbs (12.4 kg) with 15-inch
(38 cm)
bar and chain |
| BAR LENGTH |
Up to 25 inches (63 cm) |
| MOTOR SPEED |
6100 rpm |
| POWERHEAD DIMENSIONS |
23 inches (58.5 cm) length
10.5 inches (26.5 cm) height
9.5 inches (24 cm) width |
| TORQUE |
130 in-lbs |
| HORSEPOWER |
11.5 hp |
| HYDRAULIC SUPPLY |
8 gpm (30 lpm), 2500 psi (172.5 bar) |
| NOISE LEVEL |
107 dB @ 3 ft (1 m) |
| VIBRATION LEVEL |
2 meters/second2 (front handle)
6 meters/second 2 (rear handle)
|
| WATER SUPPLY |
Minimum 20 psi (1.5 bar) |
| • Product data shown is rated based on maximum input conditions and efficiency assumptions and may vary dependent on power supply. |
| 880F4-FL PRODUCT SPECIFICATIONS - 12 GPM |
| WEIGHT |
27.3 lbs (12.4 kg) with 15-inch
(38 cm)
bar and chain |
| BAR LENGTH |
Up to 25 inches (63 cm) |
| OPERATING SPEED |
6500 rpm |
| POWERHEAD DIMENSIONS |
23 inches (58.5 cm) length
10.5 inches (26.5 cm) height
9.5 inches (24 cm) width |
| TORQUE |
207 in-lbs |
| HORSEPOWER |
17.5 hp |
| HYDRAULIC SUPPLY |
12 gpm (45 lpm), 2500 psi (172.5 bar) |
| NOISE LEVEL |
107 dB @ 3 ft (1 m) |
| VIBRATION LEVEL |
2 meters/second2 (front handle)
6 meters/second 2 (rear handle) |
| WATER SUPPLY |
Minimum 20 psi (1.5 bar) |
| • Product data shown is rated based on maximum input conditions and efficiency assumptions and may vary dependent on power supply. |
|
